Detailseite
Projekt Druckansicht

Modellierung von stationären gegen transienten Wärmefluss in der COSC-1 Bohrung, Mittel Schweden

Fachliche Zuordnung Paläontologie
Physik des Erdkörpers
Förderung Förderung von 2015 bis 2021
Projektkennung Deutsche Forschungsgemeinschaft (DFG) - Projektnummer 270822516
 
Erstellungsjahr 2021

Zusammenfassung der Projektergebnisse

The drilling of the ~2.5 km COSC-1 well, which took place in the former Fröå mine near Åre in 2014, aims at deepening the understanding of the Caledonian Orogeny. The fully cored COSC-1 scientific well provides an excellent and unique opportunity to study rocks from the deeper section of the highly eroded orogen and to determine HF within the penetrated Seve Nappe situated in the Åre syncline. To do so, 104 core samples, selected in an approximately even distance and representing all major lithologies, were tested for their thermal properties, i.e. specific heat capacity, thermal diffusivity and thermal conductivity. Furthermore, hydraulic parameters were determined from selected cores indicating that heat transport in the Seve Nappe is mainly driven by conduction. Thermal properties were determined via two fundamentally different measurement approaches, a commercial optical scanner based on Popov et al. (1985) and a modified Ångström device developed at the Ruhr-Universität Bochum (RUB). Employing these two measurement devices allowed for detailed studies on directional and temperature dependencies of the thermal properties. Median λ values amount to 2.9 ±0.1 W m^-1 K^-1 and variations with temperature range from+16 % at 5 °C and -11 % at 55 °C. In addition to the experiments conducted at RUB an interlaboratory test was initiated, where nine samples were tested for the aforementioned thermal properties by five research institutes with six different testing devices. For fairly isotropic samples results were in good agreement, however, for anisotropic samples systematic deviations were identified. Temperature was logged many times in COSC-1, from these logs nearly undisturbed thermal gradients were calculated. Together with the determined thermal conductivity a detailed HF profile is calculated along the well. To further investigate the distribution of HF in the vicinity of COSC-1, 3D numerical geomodels were constructed based on seismic and potential field data interpreted by Hedin et al. (2013, 2016). Ground surface temperatures were varied according to a simplified temperature model and basal HF as well as the heat generation (HG) in the poorly constrained basement were varied systematically. Heat flow calculated along the COSC-1 well path was matched against the one determined in the well, resulting in a linear relation for possible combinations of basal HF and HG. Based on this relation, it is possible to estimate the HF from the basement into the Caledonian Nappes, i.e. 67 mW m^-2. Subsequently, the undisturbed HF was calculated for the vicinity of COSC-1 along with the undisturbed surface HF, which amount to 75 and 78 mW m-2, respectively. Both values are in excellent agreement with the HF determined in the lower section of COSC-1, i.e. 79 mW m^-2. The undisturbed HF values represent a significant extension to the knowledge and understanding of HF in west-central Sweden and contribute substantially to future research ranging from studies on the Caledonian orogeny to the reconstruction of the paleoclimate.

Projektbezogene Publikationen (Auswahl)

 
 

Zusatzinformationen

Textvergrößerung und Kontrastanpassung