GRK 1554:  Mikro-Makro-Wechselwirkungen von strukturierten Medien und Partikelsystemen

• Fachliche Zuordnung: Materialwissenschaft ; Mechanik und Konstruktiver Maschinenbau ; Verfahrenstechnik, Technische Chemie ; Werkstofftechnik
• Förderung: Förderung von 2010 bis 2019
• Projektkennung: Deutsche Forschungsgemeinschaft (DFG) - Projektnummer 83477795

• Erstellungsjahr: 2020

Zusammenfassung der Projektergebnisse

Das erklärte Ziel der Antragsteller des Fortsetzungsantrages des GK 1554 aus Mechanik, Mathematik, Thermodynamik, Verfahrenstechnik und Werkstofftechnik war die vertiefte Entwicklung physikalisch begründeter Mehrskalenmodelle und der damit unmittelbar verknüpften Mikro-Makro-Interaktionen in metallischen Werkstoffen und innerhalb von Partikelsystemen. Das GK war deshalb methoden- und grundlagenorientiert und von der Konzeption her interdisziplinär und interfakultativ durch die Vereinigung der oben genannten Fachgebiete aus den Fakultäten für Maschinenbau, Mathematik, Verfahrens- und Systemtechnik. Das Thema bleibt wissenschaftlich hochaktuell und wirft immer noch zahlreiche offene Fragen auf. Das Ziel des Graduiertenkollegs bestand vornehmlich darin • die Promotionsdauer durch eine intensive Betreuung zeitlich kalkulierbar zu machen, • eine hohe Qualität der Promotion durch ein strukturiertes Ausbildungsprogramm zu gewährleisten, • die Internationalisierung der Promotion durch englischsprachige Veranstaltungen und Teilnehmer aus verschiedensten Ländern zu fördern und • die Attraktivität einer Promotion in Magdeburg für hochqualifizierte Bewerber aus dem In- und Ausland nachhaltig zu steigern.

Projektbezogene Publikationen (Auswahl)

• 2010. Optimum Strategies to Reduce Residual Stresses and Distortion during the Metal Quenching Process, ASTM Special Technical Publication 1523 STP , pp. 411-435
  Nallathambi A. K., Y.Kaymak, E.Specht, A.Bertram
  (Siehe online unter https://doi.org/10.1520/STP49163S)
• 2010. Sensitivity of material properties on distortion and residual stresses during metal quenching processes, Journal of Materials Processing Technology, 210 (2), pp. 204-211
  Nallathambi A. K., Y.Kaymak, E.Specht, A.Bertram
  (Siehe online unter https://doi.org/10.1016/j.jmatprotec.2009.09.001)
• A pseudoelastic model for mechanical twinning on the microscale. Zeitschrift für Angewandte Mathematik und Mechanik, 90(7- 8):565–594, 2010
  Glüge R., A. Bertram, T. Böhlke, and E. Specht
  (Siehe online unter https://doi.org/10.1002/zamm.200900339)
• Bandwidth reduction on sparse matrices by introducing new variables. Revista chilena de ingeniería, 18:395–400, 2010
  Glüge R
  (Siehe online unter https://doi.org/10.4067/S0718-33052010000300013)
• Combined Model for Hardening, Softening, and Damage Processes in Advanced Heat Resistant Steels at Elevated Temperature; International Journal of Damage Mechanics 2010, 20(4)
  Naumenko, Altenbach, Kutschke, A.
  (Siehe online unter https://doi.org/10.1177/1056789510386851)
• Grain size distributions in normal grain growth. Praktische Metallographie, Volume 47, Issue 11, (2010), p. 618-639
  Zöllner D. und P. Streitenberger
  (Siehe online unter https://doi.org/10.3139/147.110100)
• Microscale modelling of deformation twinning. Proceedings of the Seventh International Conference on Engineering Computational Technology, 2010. Paper 120
  Glüge R. and A. Bertram
  (Siehe online unter https://dx.doi.org/10.4203/ccp.94.120)
• On the impact on a plate made of hyperelastic foam, Proceedings of the 3rd International Conference on Nonlinear Dynamics, pp. 236-241, 2010
  Levdokymov M., H. Altenbach and V. Eremeyev
  
• 2011. Finite element analysis of reaction front tracking in lime calcination, ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011; Honolulu
  PCG. Sandaka, Nallathambi A. K., E.Specht
  (Siehe online unter https://doi.org/10.1115/AJTEC2011-44572)
• 2011.Thermomechanical analysis of direct chill casting using finite element method, Transactions of the Indian Institute of Metals (TIIM), Vol.64, Issue 1-2, pp.13-19
  Nallathambi A. K. , M.Tyagi, E.Specht, A.Bertram
  (Siehe online unter https://doi.org/10.1007/s12666-011-0003-y)
• A Potts model for junction limited grain growth. Computational Materials Science, Volume 50, Issue 9, (2011), p. 2712-2719
  Zöllner D.
  (Siehe online unter https://doi.org/10.1016/j.commatsci.2011.04.024)
• A proposal for discrete modeling of mechanical effects during drying, combining pore networks with DEM. AIChE Journal, 57: 872-885, 2011
  Kharaghani A., T. Metzger, E. Tsotsas
  (Siehe online unter https://doi.org/10.1002/aic.12318)
• A pseudoelastic model for deformation twinning: Numerical homogenisation and comparison to experiments. International Journal of Structural Changes in Solids - Mechanics and Applications, (1):29–47, 2011
  Glüge R
  
• Characterization of Polymeric Interlayers in Laminated Glass Beams for Photovoltaic Applications, 2011, In: Shell-like Structures, Springer Berlin Heidelberg, ASM 15: 499-506 pp
  S.-H. Schulze, M. Pander, K. Naumenko, Girchenko A., H. Altenbach
  (Siehe online unter https://doi.org/10.1007/978-3-642-21855-2_32)
• Collapse criteria of foam cells under various loading, PAMM, 11(1), pp.365-366, 2011
  Ievdokymov M., H.Altenbach and V. Eremeyev
  (Siehe online unter https://doi.org/10.1002/pamm.201110174)
• Conservation laws and prediction methods for stress concentration fields; Acta Mechanica 2011, Volume 218, Issue 3-4
  H. Altenbach, V. A. Eremeyev, A. Kutschke, A. and K. Naumenko
  (Siehe online unter https://doi.org/10.1007/s00707-010-0425-3)
• Drying of highly porous particle aggregates: Pore-scale simulation and X-ray microtomography, 7th Asia-Pacific Drying Conference, 18-20 September, Tianjin, China
  Kharaghani, Wang Y.J., C. Kirsch, T. Metzger, E. Tsotsas
  
• Evolution Equations and Size Distributions in Nanocrystalline Grain Growth. Acta Materialia, Volume 59, Issue 10, (2011), p. 4235-4243
  P. Streitenberger und Zöllner D.
  (Siehe online unter https://doi.org/10.1016/j.actamat.2011.03.048)
• Fluid structures interaction analysis of helical shell with pseudoplastic liquid, Book of Abstracts APM 2011 (1-5 July 2011), IPME RAS, 47-48 pp., (2011)
  Girchenko A., H. Altenbach, V. Eremeyev
  
• Inelastic analysis versus simplified rules for stress concentration fields under variable loading and high temperature; Materials Research Innovations 2011, 15(s1)
  Naumenko, K., Altenbach, H., & Kutschke, A.
  (Siehe online unter https://doi.org/10.1179/143307511X12858957673275)
• Micromechanical creep model for pure copper. PAMM, 11(1):419–420, 2011
  O. Ozhoga-Maslovskaja, H. Altenbach, K. Naumenko, Prygorniev O., and O. Vodka
  (Siehe online unter https://doi.org/10.1002/pamm.201110201)
• Modelling of Interaction of Helical Schells with Nonlinear Viscous Fluid, Book of Abstracts 2nd International Conference on Material Modeling, Presses des MINES, 294 p., (August 31st - September 2011)
  Girchenko A., H. Altenbach, V. Eremeyev
  
• Morphological characterization of particles produced by fluidized bed agglomeration using X-ray µ-computer tomography, Microscopy Conference (2011), 28 August-02 September, Kiel, Germany
  Dadkhah M., M. Peglow, E. Tsotsas
  
• Multi-axial thermo-mechanical analysis of power plant components from 9–12% Cr steels at high temperature; Engineering Fracture Mechanics 2011, 78(8)
  Naumenko, K., Kutschke, A., Kostenko, Y., and Rudolf, T.
  (Siehe online unter https://doi.org/10.1016/j.engfracmech.2010.12.002)
• Network model for liquid migration in porous media - capillarity, friction, and gravity, 8th European Congress of Chemical Engineering (2011), 25-29 September, Berlin, Germany
  Sun Y., J. Müller, T. Metzger, E. Tsotsas
  
• Pore network drying model for particle aggregates: assessment by X-ray microtomography, 7th Asia-Pacific Drying Conference (2011), 18-20 September, Tianjin, China
  Wang Y.J., A. Kharaghani, T. Metzger, E. Tsotsas
  (Siehe online unter https://doi.org/10.1080/07373937.2012.713422)
• Pore network modeling of liquid migration in fibrous media, ProcessNet Working Party on Heat and Mass Transfer (2011), 21-22 March, Frankfurt am Main, Germany
  Sun Y., T. Metzger, E. Tsotsas
  
• Pore network modeling of lotion migration in wet wipes, Investigation of lotion distribution in wet wipes, 3rd International Conference on Porous Media (2011), 29-31 March, Bordeaux, France
  Sun Y., J. Müller, T. Metzger, E. Tsotsas
  
• Spiral piezoelectric shells: modeling and applications. Book of abstracts of EUROMECH Colloquium 527, Shell-like structures - Nonclassical theories and applications, Leucorea, Lutherstadt Wittenberg, Germany, August 22–26, 2011
  Girchenko A., V.A. Eremeyev, H. Altenbach
  
• Visualization of liquid in drying particle aggregates by X-ray microtomography and use for pore-scale modeling, 3rd European Drying Conference (2011), 26-28 October, Palma de Mallorca, Spain
  Wang Y.J., A. Kharaghani, T. Metzger, E. Tsotsas
  
• (2012) Fractal phase distribution and drying: Impact on two-phase zone scaling and drying time dependence, Drying Technology, 30 (11-12), 1129-1135
  Prat, M.; Veran-Tissoires, S.; Vorhauer, N.; Metzger, T.; Tsotsas, E.
  (Siehe online unter https://doi.org/10.1080/07373937.2012.682124)
• (2012). “Comparison of spherical and cubical representative volume elements with respect to convergence, anisotropy, and localization behavior”. In: Mathematisches Forschungsinstitut Oberwolfach Report No. 15/2012, pp. 907–909
  Glüge, R., Weber M. , and A. Bertram
  (Siehe online unter https://doi.org/10.4171/owr/2012/15)
• (2012). “Comparison of spherical and cubical statistical volume elements with respect to convergence, anisotropy, and localization behavior”. In: Computational. Material Science 63, pp. 91–104
  Glüge, R., Weber M. and A. Bertram
  (Siehe online unter https://doi.org/10.1016/j.commatsci.2012.05.063)
• (2012). “Material plasticity using the example of fiber-reinforced materials”. In: Micro-Macro-Interactions in Structured Media and Particle Systems, Summer School Berlin 2012, pp. 1–10
  Weber M., A. Bertram, and R. Glüge
  
• 2012. Mechanical behavior of mushy zone in DC casting using a viscoplastic material model, Technische Mechanik, 32(2012), pp. 342 – 357
  Penumakala P. K., A. K. Nallathambi, E. Specht, A.Bertram
  
• 2012. Modeling solidification microstructure of steel in twin-belt caster, Materials Science and Technology Conference and Exhibition 2012, MS and T 2012 1 , pp. 52-60
  Penumakala P. K., A.K.Nallathambi, E.Specht
  
• An accurate numerical method for computation of two-phase flows with surfactants. In: European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), 2012
  S. Ganesan, A. Hahn, Simon K. and L. Tobiska
  
• An irregular pore network model for convective drying of particle aggregates. Chemical Engineering Science 75:267-278, 2012
  Kharaghani A., T. Metzger, E. Tsotsas
  (Siehe online unter https://doi.org/10.1016/j.ces.2012.03.038)
• Characterization of the internal morphology of agglomerates produced in a spray fluidized bed by X-ray tomography, Powder Technology 228 (2012) p. 349-358
  Dadkhah M., M. Peglow, E. Tsotsas
  (Siehe online unter https://doi.org/10.1016/j.powtec.2012.05.051)
• Comparison of spherical and cubical representative volume elements with respect to convergence, anisotropy, and localization behavior. Mathematisches Forschungsinstitut Oberwolfach Report No. 15/2012, pages 907–909, 2012
  Glüge R., M. Weber, and A. Bertram
  (Siehe online unter https://doi.org/10.4171/OWR/2012/15)
• Comparison of spherical and cubical statistical volume elements with respect to convergence, anisotropy, and localization behavior. Computational Material Science, 63:91–104, 2012
  Glüge R., M. Weber, and A. Bertram
  (Siehe online unter https://doi.org/10.1016/j.commatsci.2012.05.063)
• Creep damage modeling of a polycrystalline material. PAMM,12(1):145– 146, 2012
  O. Ozhoga-Maslovskaja, H. Altenbach, K. Naumenko, and Prygorniev O
  (Siehe online unter https://doi.org/10.1002/pamm.201210063)
• Evolution of liquid distributions in drying particle aggregates by pore network model and X-ray microtomography, ProcessNet Working Parties on Drying, Food Processing, and Rheology (2012), 19-21 March, Hohenheim, Germany
  Wang Y.J., A. Kharaghani, T. Metzger, E. Tsotsas
  
• Grain microstructure evolution in two-dimensional polycrystals under limited junction mobility. Scripta Materialia, Volume 67, Issue 1, (2012), p. 41-44
  Zöllner D
  (Siehe online unter https://doi.org/10.1016/j.scriptamat.2012.03.016)
• Graphical representations of the regions of rank-one-convexity of some strain energies. Technische Mechanik, 32:227–237, 2012
  Glüge R. and J. Kalisch
  
• Instability Of A Piezoelectric Helical Shell Under Electrical Field, Book of Abstracts 38nd Solid Mechanics Conference, IPPT Polish Academy of Sciences, Warsaw, 320 p., (August 27 - 31, 2012)
  Girchenko A., H. Altenbach, V.A. Eremeyev
  
• Interaction of a helical shell with a nonlinear viscous fluid, Int. J. Engng Sc., 61(2012): 53-58 pp
  Girchenko A., Victor A. Eremeyev, H. Altenbach
  (Siehe online unter https://doi.org/10.1016/j.ijengsci.2012.06.009)
• Investigation of lotion distribution in wet wipes by pore network model and micro computed tomography, 4th International Conference on Porous Media and its Applications in Science and Engineering (2012), 17-22 June, Potsdam, Germany
  Sun Y., A. Kharaghani, T. Metzger, E. Tsotsas, J. Müller
  
• Investigation of lotion distribution in wet wipes by pore network model and X-ray tomography, 13. Forschungskolloquium am Fraunhofer IFF (2012), 27 April, Magdeburg, Germany
  Sun Y., J. Müller, T. Metzger, E. Tsotsas
  
• Investigation of lotion distribution in wet wipes, 4th International Conference on Porous Media (2012), 14-16 May, Lafayette, USA
  Sun Y., J. Müller, T. Metzger, E. Tsotsas
  
• Modeling droplet evolution on a porous particle as micro-scale process in fluidized bed spray drying, 18th International Drying Symposium (2012), 11-15 November, Xiamen, China
  Sun Y., A. Kharaghani, E. Tsotsas
  
• Modeling the effect of process parameters in aggregation kernel of PBE using Monte-Carlo simulations, 18th International Drying Symposium (2012), 11-15 November, Xiamen, China
  Hussain M., M. Peglow, E. Tsotsas
  
• Morphological characterization of agglomerates by X-ray tomography, ProcessNet Working Party on Agglomeration-Powder Processing and Crystallization (2012), 5-6 March, Wittenberg, Germany
  Dadkhah M., M. Peglow, E. Tsotsas
  
• Morphological characterization of fluidized bed spray drying agglomerates by X-ray tomography, 18th International Drying Symposium (2012), 11-15 November, Xiamen, China
  Dadkhah M., M. Peglow, E. Tsotsas
  
• Morphological characterization of spray fluidized bed agglomerates by using X-ray μ-computer tomography, International Conference on Mechanics of Nano, Micro and Macro Composite Structures (2012), 18-20 June, Torino, Italy
  Dadkhah M., M. Peglow, E. Tsotsas
  
• Pore network drying model for particle aggregates: Assessment by X-ray microtomography, Drying Technology 30 (2012) p. 1800-1809
  Wang Y. J., A. Kharaghani, T. Metzger, E. Tsotsas
  (Siehe online unter https://doi.org/10.1080/07373937.2012.713422)
• Pore-scale comparison of liquid distributions between pore network drying simulations and X-ray tomography, 18th International Drying Symposium (2012), 11-15 November, Xiamen, China
  Wang Y.J., A. Kharaghani, T. Metzger, E. Tsotsas
  
• The Kinetics of Individual Grains in Polycrystalline Materials. Praktische Metallographie, Volume 49, (2012), p. 428-445
  Zöllner D., P. Streitenberger und I. Fielden
  (Siehe online unter https://doi.org/10.3139/147.110192)
• ‘Fine adhesive particles – A contact model including viscous damping’, 7th International Conference for Conveying and Handling of Particulate Solids, 10.-13. September 2012, Friedrichshafen, 9 Seiten
  Mader-Arndt K.und J. Tomas
  
• ‘Functionalization and surface modification of spherical glass beads’, 7th International Conference for Conveying and Handling of Particulate Solids, 10.-13. September 2012, Friedrichshafen, 6 Seiten
  Z. Kutelova, H. Mainka, Mader-Arndt K., W. Hintz und J. Tomas
  
• ‘Modelling of the contact behaviour between fine adhesive particles with viscous damping’, in ‘Discrete element modeling of particulate media’, edited: Chuan-Yu Wu, Royal Society of Chemistry, 2012, 76-85
  Mader-Arndt K. und J. Tomas
  (Siehe online unter https://doi.org/10.1039/9781849735032-00076)
• (2013) Experimental investigation of drying in a model porous medium: Influence of thermal gradients, Drying Technology, 31, 920-929
  Vorhauer, N.; Tran, Q.T.; Metzger, T.; Tsotsas, E.; Prat, M.
  (Siehe online unter https://doi.org/10.1080/07373937.2012.724750)
• (2013). Optical Analysis of High-pressure Injections in Transparent Engine. European Conference on Liquid Atomization and Spray Systems, Chaina, Greece
  Dragomirov, P. J. Sauerhering, J. Schmidt, H. Rottengruber, J. Hadler and D. Backofen
  
• (2013). “Numerical properties of spherical and cubical representative volume elements with different boundary conditions”. In: Technische Mechanik, pp. 97–103
  Glüge, R. and Weber M.
  
• A new approach to simulate the spray fluidized bed agglomeration process using population balances, International Congress on Particle Technology (2013), 23–25 April, Nuremberg, Germany
  Hussain M., J. Kumar, M. Peglow, E. Tsotsas
  
• ALE-FEM for Two-Phase Flows. Proceedings in Applied Mathematics and Mechanics, 13(1):319–320, 2013
  Hahn, Simon K. and L. Tobiska
  (Siehe online unter https://doi.org/10.1002/pamm.201310155)
• Biomechanic approach of a growing tumor. Mechanics Research Communications, 51:32–38, 2013
  Ramírez-Torres, R. Rodríguez-Ramos, Glüge R., J. Bravo-Castillero, R. Guinovart-Díaz, and R. Rodríguez-Sanchez
  (Siehe online unter https://doi.org/10.1016/j.mechrescom.2013.04.006)
• Convective drying of particle aggregates: insights into pore-scale distribution of liquid, ProcessNet Working Party on Drying (2013), 11-12 March, Magdeburg, Germany
  Wang Y.J., A. Kharaghani, E. Tsotsas
  
• Evolution of a liquid droplet on a porous particle: A pore network study, ProcessNet Working Party on Drying (2013), 11-12 March, Magdeburg, Germany
  Sun Y., A. Kharaghani, E. Tsotsas
  
• Festkörpermechanik. Otto-von-Guericke-Universität Magdeburg, 2013
  Bertram and Glüge R
  (Siehe online unter https://doi.org/10.25673/3887)
• Generalized boundary conditions on representative volume elements and their use in determining the effective material properties. Computational Materials Science, 79:408–416, 2013
  Glüge R
  (Siehe online unter https://doi.org/10.1016/j.commatsci.2013.06.038)
• Generalized boundary conditions on representative volume elements and their use in determining the effective material properties. Proceedings in Applied Mathematics and Mechanics, 13(1):251–252, 2013
  Glüge R
  (Siehe online unter https://doi.org/10.1002/pamm.201310121)
• Glass spheres: Functionalization, surface modification and mechanical properties, in: Surface Effects in Solid Mechanics, H. Altenbach and N.F. Morozov (Eds.), Springer, Heidelberg, 2013, 95-104, ISBN 978-3-642- 35782-4
  Todorova Z., H. Mainka, K. Mader, W. Hintz, J. Tomas
  (Siehe online unter https://doi.org/10.1007/978-3-642-35783-1_8)
• Influence of process conditions on morphology of agglomerates by X-ray tomography, ProcessNet Working Party on Agglomeration-Powder Processing and Crystallization (2013), 5-8 March, Weimar, Germany
  Dadkhah M., M. Peglow, E. Tsotsas
  
• Influence of process variables on particle morphology in spray fluidized bed agglomeration, 6th International Granulation Workshop (2013), 26-28 June, Sheffield, England
  Dadkhah M., M. Peglow, E. Tsotsas
  
• Liquid imbibition in capillary porous media: Pore network simulation and micro-model experiment, 5th International Conference on Porous Media (2013), 22-24 May, Prague, Czech Republic
  Sun Y., A. Kharaghani, E. Tsotsas
  
• Micro scale fluid model for drying of highly porous particle aggregates. Computers & Chemical Engineering, 52:46-54, 2013
  Kharaghani A., C. Kirsch, T. Metzger and E. Tsotsas
  (Siehe online unter https://doi.org/10.1016/j.compchemeng.2012.12.003)
• Micro-analysis structure of fluidized bed agglomerate, International Congress on Particle Technology (2013), 23-25 April, Nuremberg, Germany
  Dadkhah M., M. Peglow, E. Tsotsas
  
• Modeling of droplet evolution on an agglomerate using pore network model, International Congress on Particle Technology (2013), 23-25 April, Nuremberg, Germany
  Sun Y., A. Kharaghani, E. Tsotsas
  
• Modeling spray fluidized bed aggregation kinetics on the basis of Monte-Carlo simulation results, Chemical Engineering Science 101 (2013) p. 35-45
  M. Hussain, J. Kumar, M. Peglow, E. Tsotsas
  (Siehe online unter https://doi.org/10.1016/j.ces.2013.06.004)
• Morphological characterization of fluidized bed spray drying agglomerates by X-Ray tomography, ProcessNet Working Party on Drying (2013), 11-12 March, Magdeburg, Germany
  Dadkhah M., M. Peglow, E. Tsotsas
  
• Numerical properties of spherical and cubical representative volume elements with different boundary conditions. Technische Mechanik, pages 97– 103, 2013
  Glüge R. and M. Weber
  
• Näherungsverfahren zur Berechnung von Kerbspannungen und -dehnungen bei Plastizität und Kriechen. Forschung im Ingenieurwesen, 77:71-80, 2013
  Eisenträger J., K. Naumenko, H. Altenbach und W. Lenz
  (Siehe online unter https://doi.org/10.1007/s10010-013-0166-2)
• Näherungsweise Ermittlung der Spannungskonzentration an Kerben bei inelastischen Verformungen im Hochtemperaturbereich (Approximative Assessment of Stress Concentration at Notches for Inelastic Deformations at High Temperatures). In: U. Gabbert et al.: Effizienz, Präzision, Qualität. 11. Magdeburger Maschinenbau-Tage, 2013
  Eisenträger J., K. Naumenko, H. Altenbach, W. Lenz
  
• On a Coupled Electric-Mechanical Behavior of the Artificial Materials With The Chiral-Shell Elements, World Academy of Science and Technology, 77(2013): 604-609 pp
  Girchenko A., V. A. Eremeyev, H. Altenbach
  
• On the Aboav-Weaire-law for junction limited grain growth in two dimensions. Computational Materials Science, Vol. 79, (2013), p. 759-762
  Zöllner D.
  (Siehe online unter https://doi.org/10.1016/j.commatsci.2013.07.031)
• Polycrystal vs. classical continuum models for structures. PAMM, 13(1), 2013
  Prygorniev O., K. Naumenko and H. Altenbach
  (Siehe online unter https://doi.org/10.1002/pamm.201310123)
• Population balance modeling of influencing parameters in spray fluidized bed granulation, 5th International Conference on Population Balance Modeling (2013), 11-13 September, Bangalore, India
  Hussain M., J. Kumar, M. Peglow, E. Tsotsas
  
• Population balance modeling of the twocompartment spray fluidized bed granulation, 5th International Conference on Population Balance Modeling (2013), 11-13 September, Bangalore, India
  Hussain M., J. Kumar, M. Peglow, E. Tsotsas
  
• Pore network drying model for particle aggregates: assessment by X-ray microtomography. Drying Technology, 30: 1800-1809, 2012
  Y.J. Wang, Kharaghani A., T. Metzger and E. Tsotsas
  (Siehe online unter https://doi.org/10.1080/07373937.2012.713422)
• Self-Similarity as a Feature of Nanocrystalline Grain Growth. Materials Science Forum, Vol. 753, (2013), p. 349-352
  Zöllner D. und P. Streitenberger
  (Siehe online unter https://doi.org/10.4028/www.scientific.net/MSF.753.349)
• Simulating the spray fluidized bed granulation by modeling the aggregation efficiency, 6th International Granulation Workshop (2013), 26-28 June, Sheffield, England
  Hussain M., J. Kumar, M. Peglow, E. Tsotsas
  
• Surface layer effects in polycrystalline structures under cyclic viscoplacticity. Proceedings of CanCNSM2013, 2013
  Prygorniev O., K. Naumenko
  
• The effective stiffness and stress concentrations of a multi-layer laminate. Composite Structures, 111(0):580–586, 2014
  Glüge R. and J. Kalisch
  (Siehe online unter https://doi.org/10.1016/j.compstruct.2014.01.027)
• Tomographic visualization and pore network modeling of liquid rings during convective drying of particle aggregates, 5th International Conference on Porous Media & Annual Meeting (2013), 21-24 May, Prague, Czech Republic
  Wang Y.J., A. Kharaghani, E. Tsotsas
  
• ‘A contact model for fine adhesive particles’, Proceedings, Partec, 23.-25. April 2013, Nürnberg, 4 Seiten
  Mader-Arndt K. und J. Tomas
  
• ‘Glass spheres: functionalization, surface modification and mechanical properties’, in: H. Altenbach and N. F. Morozov (Eds.) Surface Effects in Solid Mechanics, Advanced Structured Materials 30, Springer-Verlag Berlin 2013, 95- 104
  Z. Kutelova, H. Mainka, Mader-Arndt K., W. Hintz und J. Tomas
  (Siehe online unter https://doi.org/10.1007/978-3-642-35783-1_8)
• ‘Single particle contact vs. particle packing behavior: Model based analysis of chemically modified glass particles’, Granular Matter, 2013, 30 Seiten
  Mader-Arndt K., Z. Kutelova, R. Fuchs, J. Meyer, T. Staedler, W. Hintz und J. Tomas
  (Siehe online unter https://doi.org/10.1007/s10035-013-0478-9)
• (2014). Analysis of the Atomization Characteristics of 2nd Generation Bio-diesel (2GEN) in Comparison to Diesel-Fuel. 2nd International Conference Tailor-Made Fuels from Biomass, Aachen, Germany
  Dragomirov, P. J. Sauerhering, J. Schmidt, H. Rottengruber and J. Hadler
  
• (2014). Comperative Analysis of the DI Diesel Engine In-Cylinder Fluid Flow Applying PIV Measurements and CFD Simulations. 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics Orlando, Florida
  Dragomirov, P. D. Buchtatyj, J. Sauerhering, J. Schmidt, J. Hadler and H. Rottengruber
  
• A new point of view to determine the simulation temperature for the Potts model simulation of grain growth. Computational Materials Science, Vol. 86, (2014), p. 99-107
  Zöllner D.
  (Siehe online unter https://doi.org/10.1016/j.commatsci.2014.01.044)
• A phenomenological approach to investigate nanocrystalline grain growth. Computational Materials Science, Vol. 92, (2014), 114-119
  Zöllner D.
  (Siehe online unter https://doi.org/10.1016/j.commatsci.2014.05.026)
• Finite element simulation of an impinging liquid droplet on a hot solid substrate, 978-3-86912-110-9
  Rajasekaran, S.
  (Siehe online unter https://dx.doi.org/10.25673/4078)
• Influence of process variables on internal particle structure in spray fluidized bed agglomeration, Powder Technology 258 (2014) p. 165-173
  Dadkhah M., E. Tsotsas
  (Siehe online unter https://doi.org/10.1016/j.powtec.2014.03.005)
• Investigating the von Neumann-Mullins-relation under triple junction dragging. Acta Materialia, Vol. 70, (2014), p. 290-297
  Zöllner D. und P.R. Rios
  (Siehe online unter https://doi.org/10.1016/j.actamat.2014.02.039)
• Modeling of aggregation kernel using Monte Carlo simulations of spray fluidized bed agglomeration, AIChE Journal 60 (2014) p. 855-868
  M. Hussain, M. Peglow, E. Tsotsas, J. Kumar
  (Siehe online unter https://doi.org/10.1002/aic.14332)
• Modelling of surfactant concentration in a coupled bulk surface problem. Proceedings in Applied Mathematics and Mechanics, 14(1):525–526, 2014
  Hahn, Simon K. and L. Tobiska
  (Siehe online unter https://doi.org/10.1002/pamm.201410250)
• On two-compartment population balance modelling of spray fluidized bed agglomeration, Computers and Chemical Engineering, 61 (2014) p. 185-202
  M. Hussain, J. Kumar, M. Peglow, E. Tsotsas
  (Siehe online unter https://doi.org/10.1016/j.compchemeng.2013.11.003)
• Robust approaches for the assessment of stress concentration in the creep range. In: Proceedings of 3rd International ECCC Creep & Fracture Conference, 2014
  Eisenträger J., K. Naumenko, H. Altenbach
  
• Single particle contact versus particle packing behavior: model based analysis of chemically modified glass particles, Granular Matter 16 (3), 2014, 359–375
  K. Mader-Arndt, Todorova Z., R. Fuchs, J. Meyer, T. Staedler, W. Hintz, J. Tomas
  (Siehe online unter https://doi.org/10.1007/s10035-013-0478-9)
• Study of the morphology of solidified binder in spray fluidized bed agglomerate by X-ray tomography, Powder Technology 264 (2014) p. 256-264
  Dadkhah M., E. Tsotsas
  (Siehe online unter https://doi.org/10.1016/j.powtec.2014.05.037)
• Topology of grain microstructures in two dimensions: A comparison of grain boundary and triple junction controlled grain growth. Modelling and Simulation in Materials Science and Engineering, Vol. 22, (2014), 025028
  Zöllner D.
  (Siehe online unter https://doi.org/10.1088/0965-0393/22/2/025028)
• Triple junction controlled grain growth in two-dimensional nanocrystalline polycrystals and thin films: Self-similar growth laws and grain size distributions. Acta Materialia, Vol. 78, (2014), p. 114-124
  P. Streitenberger und Zöllner D
  (Siehe online unter https://doi.org/10.1016/j.actamat.2014.06.022)
• (2015) Drying with formation of capillary rings in a model porous medium, Transport in Porous Media, 110, 197- 223
  Vorhauer, N.; Wang, Y.; Kharaghani, R.; Tsotsas E.; Prat, M.
  (Siehe online unter https://doi.org/10.1007/s11242-015-0538-1)
• (2015). Characterisation of Second Generation Alternative Diesel Fuel Sprays. 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Kruger National Park, South Africa
  Dragomirov, P. J. Sauerhering, F. Beyrau and J. Schmidt
  
• (2015). Comparison of Diesel Fuel and Hydrogenated Vegetable Oil Combustion in an Optical Engine by Means of Simultaneous Two-Colour Imag-ing and OH* Chemiluminescence. 7th European Combustion Meeting, Budapest, Hungary
  Dragomirov, P. J. Sauerhering, J. Hadler, H. Rottengruber, J. Schmidt and F. Beyrau
  
• A layer-wise user element for the analysis of photovoltaic modules. In: M. Kleiber, M. et al. 3rd Polish Congress of Mechanics and 21st International Conference on Computer Methods in Mechanics. Short Papers Vol. 2: 883–884, 2015
  Eisenträger J., K. Naumenko, H. Altenbach
  
• A new framework for population balance modeling of spray fluidized bed agglomeration, Particuology 19 (2015) p. 141-154
  M. Hussain, J. Kumar, E. Tsotsas
  (Siehe online unter https://doi.org/10.1016/j.partic.2014.06.005)
• A user-defined finite element for laminated glass panels and photovoltaic modules based on a layer-wise theory. Composite Structures, 133:265–277, 2015
  Eisenträger J., K. Naumenko, H. Altenbach und J. Meenen
  (Siehe online unter https://doi.org/10.1016/j.compstruct.2015.07.049)
• Agglomerate fragmentation in soundinduced oscillating gaseous atmospheres, Powder Technology 291, 214-222, 2015
  Knoop, Todorova Z., J. Tomas, U. Fritsching
  (Siehe online unter https://doi.org/10.1016/j.powtec.2015.12.038)
• Analytical homogenization of linear elasticity based on the interface orientation distribution – a complement to the self-consistent approach. Composite Structures, 126:398–416, 2015
  J. Kalisch and Glüge R.
  (Siehe online unter https://doi.org/10.1016/j.compstruct.2015.02.072)
• Application of the first-order shear deformation theory to the analysis of laminated glasses and photovoltaic panels. International Journal of Mechanical Sciences, 96–97:163–171, 2015
  Eisenträger J., K. Naumenko, H. Altenbach und H. Köppe
  (Siehe online unter https://doi.org/10.1016/j.ijmecsci.2015.03.012)
• Approximate Rules for Calculation of Notch Stresses Considering Plasticity and Creep. In: A. S. Khan. Plastic Behavior of Conventional and Advanced Materials: Theory, Experiment, and Modeling - Proceedings of PLASTICITY ’15: The Twenty First International Symposium on Plasticity and its Current Applications. NEAT PRESS: 124–126, 2015
  H. Altenbach, Eisenträger J., K. Naumenko
  
• Drying with formation of capillary rings in a model porous media, Transport in Porous Media 110 (2015) p. 197-223
  N. Vorhauer, Wang Y.J., A. Kharaghani, E. Tsotsas, M. Prat
  (Siehe online unter https://doi.org/10.1007/s11242-015-0538-1)
• Drying with formation of capillary rings in a model porous medium, Transp. Porous Med., 110 (2015) 197-223
  Vorhauer N., Wang Y.J., Kharaghani A., Tsotsas E., Prat M.
  (Siehe online unter https://doi.org/10.1007/s11242-015-0538-1)
• Glide mechanisms for bundle- and plate-like structures. Technische Mechanik, 35(1):62–69, 2015
  Glüge R
  (Siehe online unter https://doi.org/10.24352/UB.OVGU-2017-070)
• Impact of Phase Distribution on the Fracture Toughness of High Temperature Resistant Mo-Si-B Alloys - Der Einfluss der Phasenverteilung auf die Bruchzähigkeit von hochtemperaturbeständigen Mo-Si-B-Legierungen, Pract. Metallogr. 52 (2015) 295–313
  Becker J., M. Krüger
  (Siehe online unter https://doi.org/10.3139/147.110322)
• Lotion distribution in wet wipes investigated by pore network simulation and X-ray micro tomography, Transport Porous Media 107 (2015) p. 449-468
  Sun Y., A. Kharaghani, T. Metzger, J. Müller, E. Tsotsas
  (Siehe online unter https://doi.org/10.1007/s11242-014-0448-7)
• Mechanical properties and failure probability of compact agglomerates. Powder Technol. 286, 546–556,2015
  Russell, Schmelzer J., P. Müller, M. Krüger, J. Tomas
  (Siehe online unter https://doi.org/10.1016/j.powtec.2015.08.045)
• Microscale modelling of multiple and higher-order deformation twinning. Acta Mechanica, 226(2):371–384, 2015
  S. Roy, Glüge R., and A. Bertram
  (Siehe online unter https://doi.org/10.1007/s00707-014-1172-7)
• Microscopic Particle Contact Adhesion Models and Macroscopic Behavior of Surface Modified Particles, in: Particle adhesion and removal, K.L. Mittal and R. Jaiswal (Eds.), Scrivener Publishing, Beverley, 2015, 105-156, ISBN: 978-1-118-83153-3
  K. Mader-Arndt, Todorova Z., J. Tomas
  (Siehe online unter https://doi.org/10.1002/9781118831571.ch3)
• Microstructure, flow behavior, and bulk texture evolution of cold drawn copper-silver composites, Journal of Alloys and Compounds, 647, 2015, Pages 519-527
  S. Dodla, Thiem P. G., M. Krüger, D. Dietrich, A. Bertram
  (Siehe online unter https://doi.org/10.1016/j.jallcom.2015.06.145)
• Modeling aggregation kinetics of fluidized bed spray agglomeration for porous particles, Powder Technology 270 (2015) p. 584-591
  M. Hussain, J. Kumar, E. Tsotsas
  (Siehe online unter https://doi.org/10.1016/j.powtec.2014.07.015)
• Monitoring of initial porosity and new pores formation during drying: a technical challenge, Trends Food Sci Tech., 45 (2015) 179-186
  Khalloufi S., Kharaghani A., Almeida-Riveraa C., Nijssea J., van Dalen G., Tsotsas E.
  (Siehe online unter https://doi.org/10.1016/j.tifs.2015.06.011)
• Serial sectioning of grain microstructures under junction control: An old problem in a new guise. IOP Conference Series: Materials Science and Engineering, Vol. 82, (2015), 012080
  Zöllner D. und P. Streitenberger
  (Siehe online unter https://doi.org/10.1088/1757-899X/82/1/012080)
• Solid Mechanics- Theory, Modeling, and Problems. Springer, 2015
  Bertram and Glüge R.
  (Siehe online unter https://doi.org/10.1007/978-3-319-19566-7)
• Studying the influence of triple junction energy and mobility on annealing processes. IOP Conference Series: Materials Science and Engineering, Vol. 89, (2015), 012061
  Zöllner D. und P. Streitenberger
  (Siehe online unter https://doi.org/10.1088/1757-899X/89/1/012061)
• The envelope of size distributions in Ostwald ripening and grain growth. Acta Materialia, Vol. 88, (2015), p. 334-345
  P. Streitenberger und Zöllner D.
  (Siehe online unter https://doi.org/10.1016/j.actamat.2015.01.035)
• von Neumann-Mullins-type evolution equations for triple and quadruple junction controlled growth. Scripta Materialia, Vol. 109, (2015), p. 52-55
  P. Streitenberger und Zöllner D.
  (Siehe online unter https://doi.org/10.1016/j.scriptamat.2015.07.016)
• A multiscale projection approach for the coupled global-local structural analysis of photovoltaic modules. Composite Structures, 158(-):340–358, 2016
  Aßmus M., K. Naumenko, and H. Altenbach
  (Siehe online unter https://doi.org/10.1016/j.compstruct.2016.09.036)
• A second gradient formulation for a 2D fabric sheet with inextensible fibres. In: Zeitschrift für angewandte Mathematik und Physik Vol. 67 (5), S. 114, 2016
  L. Placidi, L. Greco, Bucci S., E. Turco and N. L. Rizzi
  (Siehe online unter https://doi.org/10.1007/s00033-016-0701-8)
• Against the Fragmentation of Knowledge: The Power of Multidisciplinary Research for the Design of Metamaterials. In: Advanced Methods of Continuum Mechanics for Materials and Structures. Springer Singapore, S. 523 – 545, 2016
  F. Dell’isola, Bucci S. and A. Battista
  (Siehe online unter https://doi.org/10.1007/978-981-10-0959-4_28)
• Analytical and experimental describing the heat transfer in metal quenching with water sprays and jets, 12th international conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT), pp: 689-693, Malaga, Spain, 11-13 July (2016). ISBN: 978-1-77592-124-0
  Fang Y., Sabariman, E. Specht
  
• Beiträge zur analytischen und numerischen Homogenisierung in der Materialmodellierung. University of Magdeburg, 2016. Habilitation thesis
  Glüge R.
  (Siehe online unter https://doi.org/10.25673/4364)
• Calculation of the permeability in porous media using the lattice Boltzmann method, International Journal of Heat and Fluid Flow 62, 93-103, 2016
  Eshghinejadfard A, L Daróczy, G Janiga, D Thévenin
  (Siehe online unter https://doi.org/10.1016/j.ijheatfluidflow.2016.05.010)
• Capillary valve effect during drying of porous media, Int. J. Heat Mass Transfer, 94 (2016) 81-86
  Wu R., Kharaghani A., Tsotsas E.
  (Siehe online unter https://doi.org/10.1016/j.ijheatmasstransfer.2015.11.004)
• Classification of Ultra-Fine Adhesive Particles at Fine Cohesive Powders, 12th International Conference on Bulk Materials Storage, Handling and Transportation ICBMH 2016, Australia, pp.1-10, ISBN 978-1-9221-0788-6
  Kamranian Marnani A., R. Idowu, A. Bück, S. Antonyuk, D. Thévenin, and J. Tomas
  (Siehe online unter https://search.informit.org/doi/10.3316/informit.290765960709808)
• Coarsening kinetics and the envelope theorem. Acta Materialia, Vol. 111, (2016), p. 210-219
  Zöllner D. und P. Streitenberger
  (Siehe online unter https://doi.org/10.1016/j.actamat.2016.03.062)
• Direct-forcing immersed boundary lattice Boltzmann simulation of particle/fluid interactions for spherical and nonspherical particles, Particuology 25, 93-103, 2016
  Eshghinejadfard A, A Abdelsamie, G Janiga, D Thévenin
  (Siehe online unter https://doi.org/10.1016/j.partic.2015.05.004)
• Effective plastic properties of laminates made of isotropic elastic plastic materials. Composite Structures, 149:434–443, 2016
  Glüge R.
  (Siehe online unter https://doi.org/10.1016/j.compstruct.2016.04.029)
• Finite Element Computations for Dynamic Liquid–Fluid Interfaces. In: Computational Methods for Complex Liquid-Fluid Interfaces, volume 5 of Progress in Colloid and Interface Science, pages 331–351. CRC Press Taylor & Francis Group, 2016
  S. Ganesan, A. Hahn, Simon K. and L. Tobiska
  (Siehe online unter https://doi.org/10.1201/b19337-24)
• Gradient materials with internal constraints. Mathematics and Mechanics of Complex Systems, 4:1–15, 2016
  Bertram and Glüge R
  (Siehe online unter https://dx.doi.org/10.2140/memocs.2016.4.1)
• Grain Growth, In: Saleem Hashmi (editor-in-chief), Reference Module in Materials Science and Materials Engineering, Oxford: Elsevier (2016), p. 1-29
  Zöllner D.
  (Siehe online unter https://doi.org/10.1016/B978-0-12-803581-8.03158-1)
• Grain microstructural evolution in 2D and 3D polycrystals under triple junction energy and mobility control. Computational Materials Science, Vol. 118, (2016), p. 325- 337
  Zöllner D.
  (Siehe online unter https://doi.org/10.1016/j.commatsci.2016.03.031)
• Hardening of V–Si alloys during high energy ball milling, Powder Technology 294, 493–497, 2016
  Schmelzer J., T. Baumann, S. Dieck and M. Krüger
  (Siehe online unter https://doi.org/10.1016/j.powtec.2016.03.014)
• Improvement of the flowability of cohesive glass particles by surface modification, 12th International Conference on Bulk Materials Storage, Handling and Transportation (ICBMH 2016 Darwin/Australia) The. Barton, ACT: Engineers Australia, 2016, 325-334, ISBN: 9781922107886
  Todorova Z., W. Hintz, J. Tomas
  
• Influence of pore structure and impregnation drying condition on the solid distribution in porous support materials, Drying Technol., 34 (2016) 1964-1978
  M. Bornhorst, P. Walzel, A. Rahimi, Kharaghani A., E. Tsotsas, N. Nestle, A. Besser, F. Kleine Jager, T. Metzger
  (Siehe online unter https://doi.org/10.1080/07373937.2016.1147048)
• Interaction of droplet with porous structure: pore network simulation of wetting and drying, Drying Technol., 34 (2016) 1129- 1140
  Rahimi A., Kharaghani A., Metzger T., Tsotsas E.
  (Siehe online unter https://doi.org/10.1080/07373937.2015.1099106)
• Mathematical Modeling of the Diffussion of Magnetic Paraticles in a Ferrold seal under magnetic and Centrifugal Forces Ph D Thesis, Otto-von-Guericke-Universität, 978-3-86912-123-9
  Kavaliou K.
  
• Micro-model experiment and pore network simulation of liquid imbibition in porous media, Chem. Eng. Sci., 159 (2016) 41-53
  Sun Y., Kharaghani A., Tsotsas E.
  (Siehe online unter https://doi.org/10.1016/j.ces.2016.04.055)
• Micro-model experiments and pore network simulations of liquid imbibition in porous media, Chemical Engineering Science 150 (2016) p. 41- 53
  Sun Y., A. Kharaghani, E. Tsotsas
  (Siehe online unter https://doi.org/10.1016/j.ces.2016.04.055)
• Microstructure Evolution of a Directionally Solidified Ternary Eutectic Mo-Si-B Alloy. In: Materials Science Forum (879), S. 1226- 1232, 2016
  M. Krüger, G. Hasemann, Kazemi O., T. Halle
  (Siehe online unter https://doi.org/10.4028/www.scientific.net/MSF.879.1226)
• Numerical simulation of heat transfer in particulate flows using a thermal immersed boundary lattice Boltzmann method, International Journal of Heat and Fluid Flow 60, 31-46, 2016
  Eshghinejadfard A, D Thévenin
  (Siehe online unter https://doi.org/10.1016/j.ijheatfluidflow.2016.04.002)
• Numerical solutions for a weakly hyperbolic dispersed two-phase flow model. In Hyperbolic Problems, Theory, Numerics, Applications. Springer Proceedings in Mathematics and Statistics, 2016
  M. Hantke, Matern C., and G. Warnecke
  (Siehe online unter https://doi.org/10.1007/978-3-319-91545-6_51)
• On the choice of the power law flow rules and its consequences in crystal plasticity, Key Engineering Materials, 725:359-365, 2016
  Chowdhury H., K Naumenko, H Altenbach
  (Siehe online unter https://doi.org/10.4028/www.scientific.net/KEM.725.359)
• Phase field simulation of a directional solidification of a ternary eutectic Mo-Si-B Alloy. In: IOP Conference Series: Materials Science and Engineering (118), 2016
  Kazemi O., G. Hasemann, M. Krüger, T. Halle
  (Siehe online unter https://doi.org/10.1088/1757-899X/118/1/012028)
• Pore network simulations of heat and mass transfer inside the porous wick of loop heat pipe evaporator, Transp. Porous Med., 114 (2016) 623-648
  Le K.H., Kharaghani A., Kirsch C., Tsotsas E.
  (Siehe online unter https://doi.org/10.1007/s11242-016-0737-4)
• Shedding some light on the early grain growth regime: About the effect of the initial microstructure on normal grain growth. Computational Materials Science, Vol. 113, (2016), p. 11-20
  Zöllner D., P. Streitenberger und P.R. Rios
  (Siehe online unter https://doi.org/10.1016/j.commatsci.2015.11.022)
• Similarities and Differences in Mechanical Alloying Processes of V-Si-B and Mo-Si-B Powders, Metals 2016, 6, 241, 2016
  M. Krüger, Schmelzer J. and Maria Helmecke
  (Siehe online unter https://doi.org/10.3390/met6100241)
• Structure and Properties of Directionally Solidified Mo-8.7 Si-18 B Alloys. In: Naukovi visti, 2 (106), S. 69–76. NTUU KPI, Kyiv, 2016
  Bogomol, Y. I.; Kauss, O.; Hasemann, G.; Krueger, M.; Loboda, P. I.
  (Siehe online unter https://doi.org/10.20535/1810-0546.2016.2.59788)
• Study on the Compression, Flow, and Permeation of Fine and Ultra-Fine, Cohesive and Compressible Powders”, 9th International Conference on Multiphase Flow, ICMF 2016, Firenze, Italy, pp.189/1-6
  Kamranian Marnani A., A. Bück, S. Antonyuk, D. Thévenin, and J. Tomas
  
• The eigenmodes in isotropic strain gradient elasticity. Proceedings of Generalized Continua as Models for Materials with Multi-Scale-Effects or under Multi-Field-Actions, pages 157–172, 2016
  Glüge R., J. Kalisch, and A. Bertram
  (Siehe online unter https://doi.org/10.1007/978-3-319-31721-2_8)
• The spectral decomposition of the stiffness hexadic in gradient elasticity. Mathematisches Forschungsinstitut Oberwolfach Report No. 17/2016, 17:25–28, 2016
  Glüge R., J. Kalisch, and A. Bertram
  (Siehe online unter https://doi.org/10.4171/owr/2016/1)
• Three dimensional characterization of morphology and internal structure of soft agglomerates produced in spray fluidized bed by X-ray tomography, Powder Technol., 300 (2016) 46-60
  Pashminehazar R., Kharaghani A., Tsotsas E.
  (Siehe online unter https://doi.org/10.1016/j.powtec.2016.03.053)
• Treating grain growth in thin films in three dimensions: A simulation study. Computational Materials Science, Vol. 125, (2016), p. 51-60
  Zöllner D.
  (Siehe online unter https://doi.org/10.1016/j.commatsci.2016.08.026)
• Two-phase flow with capillary valve effect in porous media, Chem. Eng. Sci., 139 (2016) 241-248
  Wu R., Kharaghani A., Tsotsas E.
  (Siehe online unter https://doi.org/10.1016/j.ces.2015.09.028)
• “Distortion Induced during Quenching of Seamless Tubed", Materials Science and Engineering, DGM, Darmstadt, 2016
  Kulkarni G. A., A. K. Nallathambi, Y. Kaymak, and E. Specht
  
• “Three dimensional characterization of morphology and internal structure of soft material agglomerates produced in sprayfluidized bed by X-ray tomography“, Powder Technology 300 (2016) 46-60
  Pashminehazar R., A. Kharaghani, E. Tsotsas
  (Siehe online unter https://doi.org/10.1016/j.powtec.2016.03.053)
• (2017) Drying of thin porous disks from pore network simulations, Drying Technology, 36 (6), 651–663
  Vorhauer, N.; Tsotsas, E.; Prat, M.
  (Siehe online unter https://doi.org/10.1080/07373937.2017.1319853)
• (2017). “Material plasticity to track the elastic anisotropy at finite strains”. In: PAMM 17.1, pp. 481–482
  Weber M., R. Glüge, and A. Bertram
  (Siehe online unter https://doi.org/10.1002/pamm.201710210)
• 2017. Stability limits of the single relaxation-time advection–diffusion lattice Boltzmann scheme. International Journal of Modern Physics C, 28(12), p.1750141
  Hosseini, S.A., Darabiha, N., Thévenin, D. and Eshghinejadfard, A.
  (Siehe online unter https://doi.org/10.1142/S0129183117501418)
• 2017. Weakly compressible Lattice Boltzmann simulations of reacting flows with detailed thermo-chemical models. Computers & Mathematics with Applications
  Hosseini, S.A., Eshghinejadfard, A., Darabiha, N. and Thévenin, D.
  (Siehe online unter https://doi.org/10.1016/j.camwa.2017.08.045)
• A comparison between different approaches for modelling media with viscoelastic properties via optimization analyses. In: ZAMM‐Journal of Applied Mathematics and Mechanics/Zeitschrift für Angewandte Mathematik und MechanikVol. 97: S. 515 - 531, 2017
  T. Lekszycki, Bucci S., D. Del Vescovo, E. Turco and N.L. Rizzi
  (Siehe online unter https://doi.org/10.1002/zamm.201600121)
• A homogeneous substitute material for the core layer of photovoltaic composite structures. Composites Part B: Engineering, 112(-):353–372, 2017
  Aßmus M., J. Nordmann, K. Naumenko, and H. Altenbach
  (Siehe online unter https://doi.org/10.1016/j.compositesb.2016.12.042)
• ALE-FEM for Two-Phase and Free Surface Flows with Surfactants. In: Transport Processes at Fluidic Interfaces, Advances in Mathematical Fluid Mechanics. Springer, 2017
  S. Ganesan, A. Hahn, Simon K. and L. Tobiska
  (Siehe online unter https://doi.org/10.1007/978-3-319-56602-3_1)
• Analysis of Temperature and Strain Rate Dependencies of Softening Regime for Tempered Martensitic Steel. The Journal of Strain Analysis for Engineering Design, 52:226–238, 2017
  Eisenträger J., K. Naumenko, H. Altenbach und E. Gariboldi
  (Siehe online unter https://doi.org/10.1177/0309324717699746)
• Analytical Model for Describing Ex-perimental Results on Parameters Influencing Heat Transfer in Film Boiling with Spray Quenching, Heat Transfer Engineering. 2017
  Sabariman, Fang Y. & Eckehard Specht
  (Siehe online unter https://doi.org/10.1080/01457632.2017.1404551)
• Comparison of microstructure and adhesion strength of plasma, flame and high velocity oxy-fuel sprayed coatings from an iron aluminide powder, Surface and Coatings Technology, 324, 2017, Pages 498-508
  Thiem P. G., A. Chorny, V. Smirnov, M. Krüger
  (Siehe online unter https://doi.org/10.1016/j.surfcoat.2017.06.016)
• Consideration of non-uniform and non-orthogonal mechanical loads for structural analysis of photovoltaic composite structures. In H. Altenbach, R. V. Goldstein, and E. Murashkin, editors, Mechanics for Materials and Technologies, volume 46 of Advanced Structured Materials, pages 73–122. Springer, Singapore, 2017
  Aßmus M., S. Bergmann, J. Eisenträger, K. Naumenko, and H. Altenbach
  (Siehe online unter https://doi.org/10.1007/978-3-319-56050-2_4)
• Convective drying in thin hydrophobic porous media, Int. J. Heat Mass Transfer, 112 (2017) 630-642
  Wu R., Zhao C.Y., Tsotsas E., Kharaghani A.
  (Siehe online unter https://doi.org/10.1016/j.ijheatmasstransfer.2017.05.023)
• Discrete pore network modeling of superheated steam drying, Drying Technol., 35 (2017) 1584-1601
  Le K.H., Kharaghani A., Kirsch C., Tsotsas E.
  (Siehe online unter https://doi.org/10.1080/07373937.2016.1264414)
• Does convexity of yield surfaces in plasticity have a physical significance? Mathematics and Mechanics of Solids, 0(0):1081286517721599, 2017
  Glüge R.and S. Bucci
  (Siehe online unter https://doi.org/10.1177/1081286517721599)
• Effect of initial orientation on subgrain formation in nickel single crystals during equal channel angular pressing. Mechanics of Materials 114 (2017) 30-39
  Tohidlou E., A. Bertram
  (Siehe online unter https://doi.org/10.1016/j.mechmat.2017.06.006)
• Effect of polymer and fiber additives on pressure drop in a rectangular channel, Journal of Hydrodynamics 29 (5), 871-878, 2017
  Eshghinejadfard A, K Sharma, D Thévenin
  (Siehe online unter https://doi.org/10.1016/S1001-6058(16)60799-0)
• Effective yield limits of microstructured materials. Composite Structures, 176:496–504, 2017
  Glüge R.
  (Siehe online unter https://doi.org/10.1016/j.compstruct.2017.05.051)
• Evaporation in capillary porous media at the perfect piston-like invasion limit: Evidence of non-local equilibrium effects. Water Resources Research, 53:10433-10449, 2017
  Attari Moghaddam, M. Prat, E. Tsotsas, and A. Kharaghani
  (Siehe online unter https://doi.org/10.1002/2017WR021162)
• Evaporation in capillary porous media at the perfect piston-like invasion limit: Evidence of nonlocal equilibrium effects, Water Resour. Res., 10 (2017) 433-449.16
  Moghaddam A.A., Prat M., Tsotsas E., Kharaghani A.
  (Siehe online unter https://doi.org/10.1002/2017WR021162)
• Finite-Element Analysis of Polyhedra under Point and Line Forces in Second-Strain Gradient Elasticity. Journal of Engineering Mechanics 143(2): 04016112, 2017
  Reiher J. C., I. Giorgio, A. Bertram
  (Siehe online unter https://doi.org/10.1061/(ASCE)EM.1943-7889.0001184)
• Fully-resolved prolate spheroids in turbulent channel flows: a lattice Boltzmann study, AIP Advances 7 (9), 095007, 2017
  Eshghinejadfard A, SA Hosseini, D Thévenin
  (Siehe online unter https://doi.org/10.1063/1.5002528)
• Heat transfer analysis during jet impingement on metal plates, International Heat Transfer Conference 16 (IHTC16), pp: 2323-2331, Beijing, China, 10-15 August (2018)
  Fang Y., E. Specht
  (Siehe online unter https://dx.doi.org/10.1615/IHTC16.cod.022136)
• Higher order stabilized surface finite element methods for diffusion-convectionreaction equations on surfaces with and without boundary. PhD thesis. Otto von Guericke University Magdeburg, 2017
  Simon K
  (Siehe online unter https://doi.org/10.25673/5209)
• Immersed boundary lattice Boltzmann simulation of turbulent channel flows in the presence of spherical particles, International Journal of Multiphase Flow 96, 161-172, 2017
  Eshghinejadfard A, A Abdelsamie, SA Hosseini, D Thévenin
  (Siehe online unter https://doi.org/10.1016/j.ijmultiphaseflow.2017.07.011)
• Influence of the local topology on the von Neumann-Mullins-relation. Computational Materials Science, Vol. 137, (2017), p. 67-74
  Zöllner D
  (Siehe online unter https://doi.org/10.1016/j.commatsci.2017.05.030)
• Kinematics in a slowly drying porous medium: Reconciling pore network simulations and continuum modeling. Physics of Fluids, 29:022102, 2017
  Attari Moghaddam, A. Kharaghani, E. Tsotsas, and M. Prat
  (Siehe online unter https://doi.org/10.1063/1.4975985)
• Kinematics in a slowly drying porous medium: Reconiliation of pore network simulations and continuum modeling, Physics of Fluids, 29 (2017) 022102
  Moghaddam A.A., Kharaghani A., Tsotsas E., Prat M.
  (Siehe online unter https://doi.org/10.1063/1.4975985)
• Local heat transfer analysis during intensive cooling with water sprays and jets, 13th international conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT), pp: 401-404, Slovenia, 17-19 July (2017). ISBN: 978-1-77592-140-0
  Fang Y., E. Specht
  
• Local Projection Stabilization for Convection-Diffusion-Reaction Equations on Surfaces. BAIL 2016 Proceedings. Springer, 2017
  Simon K. and L. Tobiska
  (Siehe online unter https://doi.org/10.1007/978-3-319-67202-1_13)
• Material plasticity to track the elastic anisotropy at finite strains. Proceedings in Applied Mathematics and Mechanics (PAMM), 17(1):481– 482, 2017
  M. Weber, Glüge R., and A. Bertram
  (Siehe online unter https://doi.org/10.1002/pamm.201710210)
• Mechanical behaviour of photovoltaic composite structures: A parameter study on the influence of geometric dimensions and material properties under static loading. Composites Communications, 5(- ):23–26, 2017
  Aßmus M., S. Bergmann, K. Naumenko, and H. Altenbach
  (Siehe online unter https://doi.org/10.1016/j.coco.2017.06.003)
• Mechanical behaviour of photovoltaic composite structures: Influence of geometric dimensions and material properties on the eigenfrequencies of mechanical vibrations. Composites Communications, 6(-): 59–62, 2017
  Aßmus M., K. Naumenko, and H. Altenbach
  (Siehe online unter https://doi.org/10.1016/j.coco.2017.10.003)
• Morphogenesis of biomineralized calcitic prismatic tissue in Mollusca fully described by classical hierarchical grain boundary motion. Crystal Growth & Design, Vol. 17, (2017), p. 5023-5027
  Zöllner D., E. Reich und I. Zlotnikov
  (Siehe online unter https://doi.org/10.1021/acs.cgd.7b00965)
• Numerical Investigation of the Phase Evolution in Polymer Blends under External Mechanical Loadings, Technische Mechanik 37(1), 37-47, 2017
  J. Voges, Makvandi R., D. Juhre
  (Siehe online unter https://doi.org/10.24352/UB.OVGU-2017-080)
• Numerical Investigation of the phase Evolution in Polymer Blends under external Mechanical Loadings, Technische Mechanik, 37: 37–47, 2017
  Voges J., R. Makvandi und D. Juhre
  (Siehe online unter https://doi.org/10.24352/UB.OVGU-2017-080)
• On isotropic linear elastic material laws for directed planes. In Proceedings of the 11th International Conference on Shell Structures: Theory and Applications (SSTA 2017), pages 57–60, Gdańsk, Poland, 2017
  Aßmus M., J. Eisenträger, and H. Altenbach
  (Siehe online unter https://doi.org/10.1201/9781315166605-7)
• On isotropic linear elastic material laws for directed planes. In: W. Pietraszkiewicz, W. Witkowski. Shell Structures: Theory and Applications Volume 4. Proceedings of the 11th International Conference “Shell Structures: Theory and Applications” (SSTA 2017), 11.–13.10.2017, Gdańsk (Poland): 57–60, 2017
  M. Aßmus, Eisenträger J., H. Altenbach
  (Siehe online unter https://doi.org/10.1201/9781315166605-7)
• On the influence of subgrain boundaries on coarsening of polycrystalline grain structures. IOP Conference Series: Materials Science and Engineering, Vol. 194, (2017), 012049
  Zöllner D. und W. Skrotzki
  (Siehe online unter https://doi.org/10.1088/1757-899X/194/1/012049)
• Parameter estimation and assessment of continuum models of drying on the basis of pore network simulations. PhD thesis, Magdeburg, 2017
  Attari Moghaddam
  
• Prediction of phase distribution pattern in phase field simulations on Mo5SiB2 -primary areas in near eutectic Mo-Si-B alloy. In: IOP Conference Series: Materials Science and Engineering (181), 2017
  Kazemi O., G. Hasemann, M. Krüger, T. Halle
  (Siehe online unter https://doi.org/10.1088/1757-899X/181/1/012033)
• Projector representation of isotropic linear elastic material laws for directed surfaces. Zeitschrift für Angewandte Mathematik und Mechanik, 97(12):1625–1634, 2017
  Aßmus M., J. Eisenträger, and H. Altenbach
  (Siehe online unter https://doi.org/10.1002/zamm.201700122)
• Projector representation of isotropic linear elastic material laws for directed surfaces. Zeitschrift für angewandte Mathematik und Mechanik, 97(12):1625–1634, 2017
  M. Aßmus, Eisenträger J. und H. Altenbach
  (Siehe online unter https://doi.org/10.1002/zamm.201700122)
• Rate Dependent Tension-Compression-Asymmetry of Ti-61.8at%Al Alloys with Long Period Superstructures at 1050°C, Materials Science and Engineering A, 700: 503-511, 2017
  Chowdhury H, K Naumenko, H Altenbach, M Krüger
  (Siehe online unter https://doi.org/10.1016/j.msea.2017.06.041)
• Reversed austenite for enhancing ductility of martensitic stainless steel, pp. 308-315. In: Tagungsband zum 19. Werkstofftechnischen Kolloquium in Chemnitz: 16. und 17. März 2017. Eigenverlag, Chemnitz, 2017
  Dieck S., A. Kromm, P. Rosemann, Th. Halle
  
• Reversed austenite for enhancing ductility of martensitic stainless steel. In: IOP Conf. Ser.: Materials science and engineering, Vol 181: 1-9, 2017
  Dieck S., A. Kromm, P. Rosemann, Th. Halle
  (Siehe online unter https://doi.org/10.1088/1757-899X/181/1/012034)
• Reviewing the class of Al-rich TiAl alloys: Modeling plastic anisotropy and asymmetry. Mechanics of Advanced Materials and Modern Processes, 3:16, 2017
  Chowdhury H., H Altenbach, M Krüger, K Naumenko
  (Siehe online unter https://doi.org/10.1186/s40759-017-0031-3)
• Simulation methods in computational materials science, in: 16. Sommerkurs Werkstoffe Und Fügen, Magdeburg, 2017
  Hütter S., O. Kazemi, T. Halle
  (Siehe online unter https://doi.org/10.25673/5002)
• Stability limits of the single relaxation-time advection–diffusion lattice Boltzmann scheme, International Journal of Modern Physics C, 1750141, 2017
  SA Hosseini, N Darabiha, D Thévenin, Eshghinejadfard A
  (Siehe online unter https://doi.org/10.1142/S0129183117501418)
• Static recrystallization and grain growth of accumulative roll bonded aluminium laminates. Journal of Materials Research, Vol. 32, (2017), p. 4503-4513
  L. Lienshöft, P. Chekhonin, Zöllner D., J. Scharnweber, T. Marr, T. Krauter, H.W. Höppel und W. Skrotzki
  (Siehe online unter https://doi.org/10.1557/jmr.2017.386)
• Topological changes in coarsening networks. Acta Materialia, Vol. 130, (2017), p. 147-154
  Zöllner D. und P.R. Rios
  (Siehe online unter https://doi.org/10.1016/j.actamat.2017.03.040)
• Verbesserung der Eigenschaften vom martensitischen, nichtrostenden Stahl X46Cr13 durch Q&P-Wärmebehandlung. In: 16. Sommerkurs Werkstoffe und Fügen, pp. 95-104. Magdeburg, 2017
  Dieck S., M. Ecke, P. Rosemann, Th. Halle
  (Siehe online unter https://doi.org/10.24352/UB.OVGU-2017-75)
• Weakly compressible Lattice Boltzmann simulations of reacting flows with detailed thermo-chemical models, Computers & Mathematics with Applications, 2017
  SA Hosseini, Eshghinejadfard A, N Darabiha, D Thévenin
  (Siehe online unter https://doi.org/10.1016/j.camwa.2017.08.045)
• Örtlicher Wärmeübergang von Spray und Strahlen bei der Intensivkühlung von Metallen, 1. Aachener Ofenbau- und Thermoprocess Kolloquium, pp: 75-85,11th-12th May, 2017, Aachen ISBN: 978-3-95886-165-7
  E. Specht, H. Woche, Fang Y., J. Hoffmann
  
• “Jet Impingement Heat Transfer of Moving Metal Sheet", 13th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Portoroz, Slovenia, ISBN: 978-1-77592-140-0, pp. 393-400, 2017
  Kulkarni G. A., Sabariman, and E. Specht
  
• "Does convexity of yield surfaces in plasticity have a physical significance?" In: Mathematics and Mechanics of Solids Vol. 23(9) Seiten 1365 - 1373, 2018
  R. Glüge and Bucci S.
  (Siehe online unter https://doi.org/10.1177/1081286517721599)
• (2018) Feedback Control of Fluidised Bed Drying, In: A. Martynenko, A. Bück (Eds.) Intelligent control in drying, CRC Press
  Bück, A.; Dürr, R.; Vorhauer, N.
  (Siehe online unter https://doi.org/10.1201/9780429443183-20)
• (2018) Feedback Control of Microwave Drying, In: A. Martynenko, A. Bück (Eds.) Intelligent control in drying, CRC Press
  Bück, A.; Dürr, R.; Vorhauer, N.
  (Siehe online unter https://doi.org/10.1201/9780429443183-16)
• (2018) Temperature gradient induced doublestabilization of the evaporation front within a drying porous medium, Phys. Rev. Fluids 3, 114201
  Vorhauer, N.; Tsotsas, E.; Prat, M.
  (Siehe online unter https://doi.org/10.1103/PhysRevFluids.3.114201)
• (2018). Phase-Field Modelling of Crack Propagation in Anisotropic Polycrystalline Materials. Procedia Structural Integrity, 13, 787-792
  Liu Z., & Juhre, D.
  (Siehe online unter https://doi.org/10.1016/j.prostr.2018.12.152)
• (2018). Phase-Field Modelling of Crack Propagation in Anisotropic Polycrystalline Materials. Technische Mechanik, 38(3), 286-299
  Liu Z., & Juhre, D.
  (Siehe online unter https://doi.org/10.24352/UB.OVGU-2018-667)
• (2018). Phase-Field Modelling of Fracture in Viscoelastic Solids. Procedia Structural Integrity, 13, 781-786
  Liu Z., Roggel, J., & Juhre, D.
  (Siehe online unter https://doi.org/10.1016/j.prostr.2018.12.129)
• 2018. Mass-conserving advection– diffusion Lattice Boltzmann model for multi-species reacting flows. Physica A: Statistical Mechanics and its Applications, 499, pp.40-57
  Hosseini, S.A., Darabiha, N. and Thévenin, D.
  (Siehe online unter https://doi.org/10.1016/j.physa.2018.01.034)
• 3D mesoscopic microstructural evolution of primary recrystallization and grain growth in cold rolled single-phase aluminum alloys. Modelling and Simulation in Materials Science and Engineering, Vol. 26, (2018), 035011 (16pp)
  K.F. Adam, Zöllner D. und D.P. Field
  (Siehe online unter https://doi.org/10.1088/1361-651X/aaa146)
• A Framework for Modeling the Mechanical Behavior of Tempered Martensitic Steels at High Temperatures. Otto-von-Guericke-Universität Magdeburg, 2018. ISBN 978-3-86912-147-5
  Eisenträger J
  (Siehe online unter https://doi.org/10.25673/12268)
• A pore network study of evaporation from the surface of a drying non-hygroscopic porous medium, AIChE, 64 (2018) 1435 – 1447
  Moghaddam A.A., Kharaghani A., Tsotsas E. Prat M.
  (Siehe online unter https://doi.org/10.1002/aic.16004)
• A pore network study of evaporation from the surface of a drying non-hygroscopic porous medium. AIChE Journal, 64:1435-1447, 2018
  Attari Moghaddam, A. Kharaghani, E. Tsotsas, and M. Prat
  (Siehe online unter https://doi.org/10.1002/aic.16004)
• Alloying effects in Mo-5X (X=Zr, Ti,V) - microstructural modifications and mechanical properties, Mater. Today Commun. 15 (2018) 314–321
  Becker J., U. Betke, E. Wessel, M. Krüger
  (Siehe online unter https://doi.org/10.1016/j.mtcomm.2018.04.005)
• Analysis of iron aluminide coated beams under creep conditions in high-temperature four-point bending tests. Journal of Strain Analysis 53, 2018, Pages 255-265
  J. Nordmann, Thiem P. G., N. Cinca, K. Naumenko, M. Krüger
  (Siehe online unter https://doi.org/10.1177/0309324718761305)
• Aspects of Power Law Flow Rules in Crystal Plasticity with Glide-Climb Driven Hardening and Recovery, Int. J. of Mechanical Sciences, 146-147:486-496, 2018
  Chowdhury H. , K Naumenko, H Altenbach
  (Siehe online unter https://doi.org/10.1016/j.ijmecsci.2017.06.019)
• Calibration of a Phase Mixture Model for Hardening and Softening Regimes in Tempered Martensitic Steel Over Wide Stress and Temperature Ranges. The Journal of Strain Analysis for Engineering Design, 53:156–177, 2018
  Eisenträger J., K. Naumenko und H. Altenbach
  (Siehe online unter https://doi.org/10.1177/0309324718755956)
• Corrigendum to “Topological changes in coarsening networks”. Acta Materialia, Vol. 158, (2018), p. 466-467
  Zöllner D. und P.R. Rios
  (Siehe online unter https://doi.org/10.1016/j.actamat.2018.07.068)
• Critical stresses estimation by crystal viscoplasticity modeling of rate dependent anisotropy of Al-rich TiAl alloy at high temperature, Archive of Applied Mechanics, 88(1-2):65-81, 2018
  Chowdhury H., K Naumenko, H Altenbach, M Krüger
  (Siehe online unter https://doi.org/10.1007/s00419-017-1291-4)
• Density Reduction of Mo-Si-B Alloys by Vanadium Alloying, JOM. 70 (2018) 2574–2581
  Becker J., U. Betke, M. Hoffmeister, M. Krüger
  (Siehe online unter https://doi.org/10.1007/s11837-018-3088-5)
• Dependency of continuum parameters on the spatially correlated pore structure studied by pore-network drying simulations. 21st International Drying Symposium, Valencia Spain, 2018
  Lu X., A. Kharaghani, E. Tsotsas
  (Siehe online unter https://doi.org/10.4995/IDS2018.2018.7417)
• Distance of a stiffness tetrad to the symmetry classes of linear elasticity. International Journal of Solids and Structures, 2018
  M. Weber, Glüge R., and A. Bertram
  (Siehe online unter https://doi.org/10.1016/j.ijsolstr.2018.08.021)
• Finite third-order Gradient Elasticity and Thermoelasticity. Journal of Elasticity 133: 223-252, 2018
  Reiher J. C., A. Bertram
  (Siehe online unter https://doi.org/10.1007/s10659-018-9677-2)
• Global structural analysis at photovoltaic modules: theory, numerics, application (in German). Dissertation, Otto von Guericke University Magdeburg, 2018
  Aßmus M.
  
• Grain Growth - Unresolved Issues. Materials Science and Technology, Vol. 34, (2018), p. 629-638
  P.R. Rios und Zöllner D.
  (Siehe online unter https://doi.org/10.1080/02670836.2018.1434863)
• Heat transfer analysis during metal cooling with sprays and jets, Heat Processing, Jan/2018, pp: 41-47, ISSN: 1611-616X, Vulkan-Verlag
  H. Woche, Fang Y., E. Specht
  
• Implementation of a Phase Mixture Model for Rate-Dependent Inelasticity. Proceedings in Applied Mathematics and Mechanics, 18(1):1-2, 2018
  Eisenträger J., K. Naumenko und H. Altenbach
  (Siehe online unter https://doi.org/10.1002/pamm.201800200)
• Investigation of Distortion in Quenching of Seamless Tubes", Student technical Conference, Petroleum and Drilling Engineering related Geoscience Geothermics, 2018
  S. B. Gopalkrishna, Kulkarni G. A., A. K. Nallathambi, Y. Kaymak, and E. Specht
  
• Isogeometric analysis of first and second strain gradient elasticity, Computational Mechanics 61(3), 351-363, 2018
  Makvandi R., J. C. Reiher, A. Bertram, D. Juhre
  (Siehe online unter https://doi.org/10.1007/s00466-017-1462-8)
• Isogeometric analysis of first and second strain gradient elasticity. Computational Mechanics 61: 351-363, 2018
  R. Makvandi, Reiher J. C., A. Bertram D. Juhre
  (Siehe online unter https://doi.org/10.1007/s00466-017-1462-8)
• Lattice Boltzmann simulation of resolved oblate spheroids in wall turbulence, Journal of Fluid Mechanics 849, 510-540, 2018
  Eshghinejadfard A, L Zhao, D Thévenin,
  (Siehe online unter https://doi.org/10.1017/jfm.2018.441)
• Mechanical models and finiteelement approaches for the structural analysis of photovoltaic composite structures: A comparative study. Mechanics of Composite Materials, 54(4):415–430, 2018
  M. Haghi, Aßmus M., K. Naumenko, and H. Altenbach
  (Siehe online unter https://doi.org/10.1007/s11029-018-9752-6)
• Microstructural characterization of martensitic Q&P steels - a comparison of etching techniques and electron backscatter diffraction. In: Practical metallography, Vol 55: 660-667, 2018
  Dieck S., M. Ecke, J. Frömert, Th. Halle
  (Siehe online unter https://doi.org/10.3139/147.110514)
• Microwave drying of wet clay with intermittent heating, Drying Technology
  Vorhauer, N.; Tretau, A.; Bück, A.; Prat, M.
  (Siehe online unter https://doi.org/10.1080/07373937.2018.1547740)
• Modelling texture dependent grain growth by 2D Potts model simulations: A detailed analysis. Computational Materials Science, Vol. 155, (2018), p. 180-196
  Zöllner D. und I. Zlotnikov
  (Siehe online unter https://doi.org/10.1016/j.commatsci.2018.08.044)
• Numerical Implementation of a Phase Mixture Model for Rate-Dependent Inelasticity of Tempered Martensitic Steels. Acta Mechanica, 229:3051-3068, 2018
  Eisenträger J., K. Naumenko und H. Altenbach
  (Siehe online unter https://doi.org/10.1007/s00707-018-2151-1)
• On the effective elastic properties of isotactic polypropylene. Polymer, 2018
  Glüge R., H. Altenbach, I. Kolesov, N. Mahmood, M. Beiner, and R. Androsch
  (Siehe online unter https://doi.org/10.1016/j.polymer.2018.10.061)
• On the topology and size advantage of potentially abnormal grains. Computational Materials Science, Vol. 153, (2018), p. 382-391
  Zöllner D. und P.R. Rios
  (Siehe online unter https://doi.org/10.1016/j.commatsci.2018.07.012)
• Prediction of Thermodynamic Properties of Mo-Si-B Alloys from First-Principles Calculations, Metallurgical and Materials Transactions A. (2018)
  Hütter S., G. Hasemann, J. Al-Karawi, M. Krüger, T. Halle
  (Siehe online unter https://doi.org/10.1007/s11661-018-4928-1)
• Reversed austenite for enhancing ductility of martensitic stainless steel, pp. 123-128. In: Proceedings of the International Conference on Martensitic Transformations. Springer, Chicago, 2018
  Dieck S., M. Ecke, P. Rosemann, Th. Halle
  (Siehe online unter https://doi.org/10.1007/978-3-319-76968-4_19)
• Simulation of anisotropic diffusion under large deformations in polymer blends, Proceedings in Applied Mathematics and Mechanics, 18: e201800320, 2018
  Voges J., D. Juhre
  (Siehe online unter https://doi.org/10.1002/pamm.201800320)
• Spatial morphology of maltodextrin agglomerates from X-ray microtomographic data: Real structure evaluation vs. spherical primary particle model“, Powder Technology 331 (2018) 204 -217
  Pashminehazar R., S.J. Ahmed, A. Kharaghani, E. Tsotsas
  (Siehe online unter https://doi.org/10.1016/j.powtec.2018.03.008)
• Visualising elastic anisotropy: Theoretical background and computational implementation. Continuum Mechanics and Thermodynamics, 30(4):689–708, 2018
  J. Nordmann, Aßmus M., and H. Altenbach
  (Siehe online unter https://doi.org/10.1007/s00161-018-0635-9)
• Wärmeübergang von Sprays und Strahlen bei der Kühlung heißer Metalle, Prozesswärme, Jan/2018, pp: 129-136, ISSN: 2567-3742, Vulkan-Verlag
  H. Woche, Fang Y., E. Specht
  
• “Influence of Water Cooling on Stresses in DC Casting of Aluminum Alloys", Symposium and Workshop for Analytical Youth on Applied Mechanics, 2018. ISBN: 978- 9-38676-713-6
  S. Ramasamy, Kulkarni G. A., A. K. Nallathambi, and E. Specht
  
• “Microwave and ultrasound-assisted convective drying of raspberries: Drying kinetics and microstructural changes“, Drying Technology (2018)
  J. Szadzinska, J. Lechtanska, Pashminehazar R., A. Kharaghani, E. Tsotsas
  (Siehe online unter https://doi.org/10.1080/07373937.2018.1433199)
• “Quantifying the Parameters Influencing Heat Transfer during Quenching of Metal Plate", 5th International Conference on Heat Transfer and Fluid Flow, Madrid, Spain, 2018
  Kulkarni G. A., E. Specht
  
• “Thermal Stresses in Quenching of Moving plate by an Array of Jets", Symposium and Workshop for Analytical Youth on Applied Mechanics, 2018. ISBN: 978-9-38676-713-6
  S. B. Gopalkrishna, Kulkarni G. A., A. K. Nallathambi, and E. Specht
  
• (2019) Evaporation study based on micromodel-experiments: Comparison of theory and experiment, Water Resources Research
  Geistlinger, H.; Ding, Y.; Apelt, B.; Schlueter, S.; Küchler, M.; Reuter, D.; Vorhauer, N.; Vogel, H.-J.
  (Siehe online unter https://doi.org/10.1029/2018WR024647)
• (2019). “Distance of a stiffness tetrad to the symmetry classes of linear elasticity”. In: International Journal of Solids and Structures 156- 157, pp. 281–293
  Weber M., R. Glüge, and A. Bertram
  (Siehe online unter https://doi.org/10.1016/j.ijsolstr.2018.08.021)
• 2019. Hybrid Lattice Boltzmann-Finite Difference model for low Mach number combustion simulation. Combustion and Flame 209, pp.-394-404
  Hosseini, S.A., Safari, H., Darabiha, N., Thévenin, D. and Krafczyk, M.
  (Siehe online unter https://doi.org/10.1016/j.combustflame.2019.07.041)
• 2019. Lattice Boltzmann advectiondiffusion model for conjugate heat transfer in heterogeneous media. International Journal of Heat and Mass Transfer, 132, pp. 906-919
  Hosseini, S.A., Darabiha, N. and Thevenin, D.
  (Siehe online unter https://doi.org/10.1016/j.ijheatmasstransfer.2018.12.034)
• 2019. Stability of the lattice kinetic scheme and choice of the free relaxation parameter. Physical Review E, 99, 063305
  Hosseini, S.A., Coreixias, C., Darabiha, N. and Thévenin, D.
  (Siehe online unter https://doi.org/10.1103/physreve.99.063305)
• 2019. Theoretical and numerical analysis of the lattice kinetic scheme for complex-flow simulations. Physical Review E, 99(2), 023305
  Hosseini, S.A., Darabiha, N. and Thévenin, D.
  (Siehe online unter https://doi.org/10.1103/physreve.99.023305)
• Biomineralized tissue formation as an archetype of ideal grain growth. Materials Horizons, Vol. 6, (2019)
  Zöllner D. und I. Zlotnikov
  (Siehe online unter https://doi.org/10.1039/C8MH01153B)
• Coarsening in nanocrystalline thin films: A 4D problem. IOP Conference Series: Materials Science and Engineering, Vol. 580, (2019), 012060
  Öncü und Zöllner D.
  (Siehe online unter https://doi.org/10.1088/1757-899X/580/1/012060)
• Determination of the moisture transport coefficient from pore network simulations of spontaneous imbibition in capillary porous media, Chemical Engineering Science 207 (2019) p. 600-610
  Jabbari, Y., Tsotsas, E., Kirsch, C., Kharaghani, A.
  (Siehe online unter https://doi.org/10.1016/j.ces.2019.07.002)
• Effect of strain hardening on subgrain formation during ECAP process. Mechanics of Materials 137 (2019)
  Tohidlou E., A. Bertram
  (Siehe online unter https://doi.org/10.1016/j.mechmat.2019.103077)
• Effects of second phases in Mo-Zr alloys – A study on phase evolution and mechanical properties. In: Advances in Mechanics of High-Temperature Materials (Eds: K. Naumenko, M. Krüger). pp. 93-106
  Becker J., H.F. Siems, M. Krüger
  (Siehe online unter https://doi.org/10.1007/978-3-030-23869-8_5)
• Identification of Tractionseparation Curves for Self-Adhesive Polymeric Films Based on Non-linear Theory of Beams and Digital Images of T-peeling. In: Composite Structures, 2019
  Bagheri B., S. H. Schulze, K. Naumenko und H. Altenbach
  (Siehe online unter https://doi.org/10.1016/j.compstruct.2019.02.060)
• Local projection stabilization for convection–diffusion–reaction equations on surfaces. In: Computer Methods in Applied Mechanics and Engineering, 344:34-53. Elsevier, 2019
  Simon K. and L. Tobiska
  (Siehe online unter https://doi.org/10.1016/j.cma.2018.09.031)
• Microstructure of accumulative roll bonded high purity aluminium laminates. Materialia, Vol. 5, (2019), 100236
  P. Chekhonin, Zöllner D., E. Zimmer, J. Scharnweber, J. Romberg und W. Skrotzki
  (Siehe online unter https://doi.org/10.1016/j.mtla.2019.100236)
• Morphological and textural evolution of the prismatic ultrastructure in mollusc shells: A comparative study of Pinnidae species. Acta Biomaterialia, Vol. 85, (2019), p. 272-281
  E. Reich, V. Schoeppler, R. Lemanis, E. Lakin, E. Zolotoyabko, Zöllner D. und I. Zlotnikov
  (Siehe online unter https://doi.org/10.1016/j.actbio.2018.12.023)
• Printability of gas atomized Mo-Si-B powders by laser metal deposition, International Journal of Refractory Metals and Hard Materials Vol. 78,123-126, 2019
  Schmelzer J., S.-K. Rittinghaus, A. Weisheit, M. Stobik, J. Paulus, K. Gruber, E. Wessel, C. Heinze, M. Krüger
  (Siehe online unter https://doi.org/10.1016/j.ijrmhm.2018.08.016)
• Quantification of sheet nacre morphogenesis using X-ray nanotomography and deep learning. Journal of Structural Biology (2019)
  M. Beliaev, Zöllner D., A. Pacureanu, P. Zaslansky, L. Bertinetti, I. Zlotnikov
  (Siehe online unter https://doi.org/10.1016/j.jsb.2019.107432)
• Stochastic model to simulate spray fluidized bed agglomeration: A morphological approach. Powder Technology
  Singh A. K. and E. Tsotsas
  (Siehe online unter https://doi.org/10.1016/j.powtec.2019.07.075)
• Structural Mechanics of Anti-Sandwiches. An Introduction. SpringerBriefs in Continuum Mechanics. Springer, Cham, 2019
  Aßmus M.
  (Siehe online unter https://doi.org/10.1007/978-3-030-04354-4)
• Texture controlled grain growth in thin films studied by 3D Potts model. Advanced Theory and Simulations, (2019), 1900064
  Zöllner D. und I. Zlotnikov
  (Siehe online unter https://doi.org/10.1002/adts.201900064)
• The Effect of the Presence of Very Cohesive Geldart C Ultra-Fine Particles on the Fluidization of Geldart A Fine Particle Beds, Processes, 7(35), 2019, pp.1-28
  Kamranian Marnani A., A. Bück, S. Antonyuk, B. van Wachem, D. Thévenin, and J. Tomas
  (Siehe online unter https://doi.org/10.3390/pr7010035)
• The effect of very cohesive ultrafine particles in mixtures on compression, consolidation, and fluidization, Processes, 7(439), 2019, pp.1-20
  Kamranian Marnani A., A. Bück, S. Antonyuk, B. van Wachem, D. Thévenin, and J. Tomas
  (Siehe online unter https://doi.org/10.3390/pr7070439)
• The potential of mechanical alloying to improve the strength and ductility of Mo–9Si–8B–1Zr alloys – experiments and simulation, Intermetallics 113, 106558, 2019
  M. Krüger, O. Kauss, K. Naumenko, C. Burmeister, E. Wessel, Schmelzer J.
  (Siehe online unter https://doi.org/10.1016/j.intermet.2019.106558)
• The Riemann problem for a weakly hyperbolic two-phase flow model of a dispersed phase in a carrier fluid. Quarterly of Applied Mathematics 78(3):1
  M. Hantke, Matern C. V. Ssemaganda, and G. Warnecke
  (Siehe online unter https://doi.org/10.1090/qam/1556)
• Topological transitions: A topological random walk or pure geometric necessity. Computational Materials Science, Vol. 166, (2019), p. 42-56
  Zöllner D.Zöllner D., P.R. Rios und I. Zlotnikov
  (Siehe online unter https://doi.org/10.1016/j.commatsci.2019.04.047)
• “Determination of fractal dimension and prefactor of agglomerates with irregular structure“, Powder Technology 343 (2019) 765 - 774
  Pashminehazar R., A. Kharaghani, E.Tsotsas
  (Siehe online unter https://doi.org/10.1016/j.powtec.2018.10.046)
• “Eulerian Steady State Solution of Boiling Curve for Impinging Water Jet on Moving Hot Metal Plate", Heat and Mass Transfer, 2019
  Kulkarni G. A., A. K. Nallathambi, and E. Specht
  (Siehe online unter https://doi.org/10.1007/s00231-018-02556-z)
• “Nonsta-tionary convective drying of raspberries assisted with microwaves and ultrasound“, Drying Technology, Drying Technology 37 (2019) 1-12
  J. Szadzinska, J. Lechtanska, Pashminehazar R., A. Kharaghani, E. Tsotsas
  (Siehe online unter https://doi.org/10.1080/07373937.2018.1481087)